A-Laser Helps Cardica Produce Next-Generation Medical Devices


Reading time ( words)

Cardica, a designer and manufacturer of proprietary stapling and automated anastomotic devices for cardiac and laparoscopic surgical procedures, has partnered with precision laser-cutting and engineering firm, A-Laser, to expand and refine its line of next-generation medical devices.

“For several years, we have worked with A-Laser on a number of product prototypes as well as ongoing precision parts manufacturing,” explains Donovan Ware, Materials Manager for Redwood City, California-based Cardica.  “The quality of the laser-cut components A-Laser supplies is consistently high and the engineering team continues to be an invaluable resource for ensuring proper materials sourcing and design collaboration.”

Cardica’s relationship with A-Laser began with the development of its revolutionary MicroCutter XCHANGE® 30 surgical stapler, an 80° articulating device with an exceptionally small 5mm shaft.  Precision laser cutting of thin metal parts with tight tolerances was critical for the prototype development of this product and A-Laser’s comprehensive range of laser cutting services and the company’s engineering expertise have been instrumental in the progression of the MicroCutter product line.    

“Our partnership with Cardica is very rewarding,” comments Josh Saunders, A-Laser’s President.  “Knowing that we are playing a part in the manufacture of revolutionary medical devices is gratifying.  And, the challenging designs from Cardica drive us to innovate new ways to manufacture exceptionally small, precise stainless steel components.  In fact, one part can only be manufactured through a process of chemical etching and laser cutting, which is a technique A-Laser perfected and now employs to produce a specialty part used in Cardica’s MicroCutter device.”

In addition to its laser cutting expertise, A-Laser’s short lead times and local proximity are key advantages for Cardica.  Reduced cycle times offer numerous benefits including improved productivity, shortened product development cycles, nimble design modification capability and  inventory reduction, among others.  “A-Laser is very responsive and goes above and beyond,” says Ware.  “We can deliver a design and have parts in a couple of days.  For a small company that’s trying to prototype very quickly, those days save us a huge amount of time and money.   Our relationship with A-Laser continues to provide benefits on multiple fronts and, ultimately, we believe that surgeons and patients are the beneficiaries.”

About A-Laser, an FCT Companies Business

Based in Milpitas, California, A-Laser offers precision parts manufacturing for a variety of end markets including medical, industrial and electronics, among others.  Integrating broad process capabilities such as laser marking, chemical etching, bending and forming and CO 2 laser cutting, A-Laser is delivering innovative products that address complex design requirements.  A pioneer in the laser direct structuring (LDS) process, A-Laser technologists have revolutionized the molded interconnect device (MID) market and are providing customers with limitless design and production opportunities.  For more information, visit www.a-laser.com.

Share

Print


Suggested Items

Communication, Part 4: The Top 5 Causes of Engineering Delays

10/25/2019 | Steve Williams, The Right Approach Consulting LLC
In Part 4 of this series on how PCB fabricators and designers can better communicate, Bob Chandler from CA Design and Mark Thompson from Prototron Circuits address the top five causes of engineer delays.

Communication, Part 3: Why Do Board Shops Ask So Many Questions?

10/18/2019 | Steve Williams, The Right Approach Consulting LLC
In Part 3, Bob Chandler from CA Design and Mark Thompson from Prototron Circuits speak with Steve Williams about the importance of preparing, sending, and receiving comprehensive (and ideally, perfectly complete) design data packages. If you’ve ever wondered why the CAM department asks you so many questions, read on.

Happy Holden Previews His AltiumLive Frankfurt Keynote

10/17/2019 | Andy Shaughnessy, I-Connect007
I recently sat down for an interview with Happy Holden, who is slated to give a keynote speech at this year’s AltiumLive event in Frankfurt, Germany. Happy gives a preview of his presentation, which is focused on smart factories and automation, and why artificial intelligence might improve PCB design and fabrication in the future.



Copyright © 2019 I-Connect007. All rights reserved.