This Month in Design007 Magazine: Dear Designers—Please Include a Sanity Check


Reading time ( words)

No discussion about fab notes and documentation would be complete without the insight from DownStream Technologies. DownStream has spent 18 years developing tools to help PCB designers provide more accurate, complete data packages to the fabricator. We recently asked Rick Almeida, DownStream co-founder, and Technical Sales Manager Ray Fugitt to discuss why so many fabricators are still receiving (and correcting) inaccurate and incomplete data from their customers. And if fabricators and designers are content with this current process, is it really a problem after all?

Andy Shaughnessy: It’s great to speak with you both, even by conference call. Can you tell us about some of the biggest problems that fabricators have to deal with, as far as data from their customers?

Rick Almeida: Ray’s experience is actually working for fabricators, so he’d have a pretty good technical knowledge of what some of the issues are. But from what we see as a company, dealing with this on a day-to-day basis, is that some of the problems are in a couple of different areas. One is there’s a myriad of data files that get handed off. The market, in general, is still Gerber-centric and not so much single manufacturing file-centric. Because of that, you have a lot of different data files and documentation to tell you how to use those data files, which creates issues. When you have so many different data files, you run into the issue of if all the data files are there and correct. Does the design itself line up with what the manufacturer is asking you to build? Those are the common things that we see people having problems with. Ray, do you want to add anything to that?

Ray_Fugitt.jpgRay Fugitt: One of the biggest ones we see, and especially since I’m in tech support now, is bad data out of the CAD systems. There is this thought throughout the industry that the CAD systems don’t put out bad data, but we see it every day.

Barry Matties: Why are they getting bad data out of the CAD system?

Fugitt: I have examples. Things like—I’ll throw the term out there, and you can put yourself to sleep Googling it—“self-intersecting polygons.”

Almeida: It’s just a conversion of the intelligent design into unintelligent Gerber files, and what that entails to drive a machine, as opposed to screen graphics.

Fugitt: We’re doing a translation, and just to carry that one just a little bit further is it’s illegal, per the Gerber spec, to get all the CAD system’s output and know how you can go any further with that.

Almeida: It always goes back to that common issue between design systems and manufacturing systems. This is at the end of the process, and it’s where the smallest amount of R&D is spent on the manufacturing side of the design tools. And that’s a large reason why people are still gravitating toward Gerber files, as opposed to an ODB++ or an IPC-2581 file; they just don’t have that experience.

To read this entire interview, which appeared in the August 2020 issue of Design007 Magazine, click here.

Share




Suggested Items

Randy Faucette Discusses PCB Carolina’s Explosive Growth

12/01/2022 | Andy Shaughnessy, I-Connect007
One of the fastest-growing tabletop shows is PCB Carolina, which is held at NC State University in Raleigh. Each year, the show draws more exhibitors than the venue hall can hold, pushing some exhibitors out into the lobby. And this year, the number of registered attendees broke the 1,000 mark for the first time. At PCB Carolina, I spoke with Randy Faucette, the founder of the Research Triangle Park design bureau Better Boards, which organizes this annual tradeshow and conference, and I asked him to share the secret to this show’s expansion.

DownStream Flexes in Rigid-Flex

11/14/2022 | Andy Shaughnessy, Design007 Magazine
During PCB West, I caught up with DownStream Technologies co-founder Joe Clark and Senior Product Marketing Manager Mark Gallant. We discussed some of their latest tool updates, including a greater focus on bringing post-processing functionality, such as inter-layer analysis capability, to rigid-flex circuits. Joe also offered a look at global design trends going into 2023, as more engineers take on PCB designer roles while senior designers are retiring.

Forming Standards for Ultra HDI

10/25/2022 | Andy Shaughnessy, Design007 Magazine
To get the latest news about ultra high-density interconnections (UHDI), we checked in with Jan Pedersen, NCAB Group’s director of technology. Jan is co-chair of IPC D-33AP, and a great source of overall DFM expertise as well. We asked him to give us a snapshot of UHDI in the industry, where we’re headed, and what this means to PCB designers.



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.