SEMI FlexTech Funds 5 New R&D Projects for Flexible Hybrid Electronics


Reading time ( words)

SEMI FlexTech announced more than $5 million in funding for five new research and development (R&D) projects aimed at flexible hybrid electronics (FHE) innovations for sensors, medical devices, automotive electronics and other consumer and industrial microelectronics products.

“The new projects push the limits of technology in ways that are not funded by private sector alone, illustrating the vital importance of the SEMI FlexTech program in evolving FHE technology development across multiple high-growth industries,” said Gity Samadi, Director of R&D Programs for SEMI FlexTech. “Flexible hybrid electronics help transform traditional rigid products into devices that are conforming, highly reliable, and often more sustainable.”

Project Overviews

ACI Materials will optimize the performance of its Alchemy high-film-thickness conductive sintering and semi-sintering pastes, inks, and coating for additive manufacture of higher performance FHE and direct writing in 3D printed circuit structures. Advanced inks are a key enabler to the continued growth of 3D printed components, a rapidly growing manufacturing capability. ACI is teaming with nScrypt for this 18-month project costing $510,000.

The University of Washington will demonstrate a systematic approach to in situ monitoring and machine learning control of electrohydrodynamic inkjet printing, enabling adaptable and scalable micron-scale manufacturing of 2D optics, interconnects and flexible devices. The UW will team with Iowa State University, SIJTechnology, Cyber Manufacturing and Metrology Solutions and Kent Displays on this $848,847 project.

Cornell University will apply artificial intelligence (AI) to increasing the reliability of printed electronics using optical and ultrasonic metrologies and acoustic emissions. Cornell will team with BotFactory and Geegah LLC on this $575,000 project.

GE Research will develop and demonstrate a bio-inspired soft robot for assisting a human operator in performing inspection maintenance and repair (IMR) in highly confined spaces inside industrial and defense facilities. GE Research will collaborate with Binghamton University, Georgia Tech and UES on this 18-month project costing $2 million.

GE Research will develop a high-power (≥1.2kV), low-profile, low-inductance silicon carbide power module using conformable direct write interconnects and packaging. Costing $1.8 million, the 18-month project promises to make high-power, high-voltage and high-current electronics more customizable and reduce the cost of producing them in low volume. 

The FlexTech R&D program is supported by the U.S. Army Research Laboratory (ARL), based in Adelphi, Maryland.

Share




Suggested Items

The Printed Electronics Roundtable, Part 3

10/30/2022 | Andy Shaughnessy, Design007 Magazine
We recently conducted a roundtable with a team of printed electronic circuit experts from companies that run the gamut: John Lee and Kevin Miller of Insulectro, Mike Wagner of Butler Technologies, Tom Bianchi of Eastprint, and John Voultos of Sheldahl Flexible Technologies. In this third and final installment of the roundtable, these experts discuss some of the differences and similarities between PEC and traditional PCB processes, the future of printed electronic circuits, and why the best way to learn about this technology is through networking with veterans of this segment who are eager to share their expertise with the next generation.

The Chip Shortage Leads to Innovation

10/03/2022 | Malcolm Thompson, NextFlex
The chip shortage is by no means over, with estimates expecting it will last into 2023. Some could see it taking even longer, such as Intel CEO Pat Gelsinger, who expects it to see shortages into 2024 due to those now impacting electronics production equipment. But if there’s any bright spot to be had, it’s that a crisis often leads to long-term solutions. In this case, it’s the increase in government funding for semiconductor production in the United States. Once the CHIPS Act proceeds, we can significantly accelerate building semiconductor fabs in the United States and work toward preventing future chip shortages that would put us back into our current situation.

Part 2: The Printed Electronics Roundtable

09/22/2022 | Andy Shaughnessy, Design007 Magazine
We recently held a roundtable with a team of printed electronic circuit experts from companies that run the gamut: John Lee and Kevin Miller of Insulectro, Mike Wagner of Butler Technologies, Tom Bianchi of Eastprint, and John Voultos of Sheldahl Flexible Technologies. In the first part of this roundtable, the team dispelled a variety of myths surrounding PEC. In this second part of the roundtable, the participants discuss what designers and fabricators need to know to jump into printed electronics, and some of the drivers behind this growing technology.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.