Flexible Electronics Spark PhD Student’s Interest


Reading time ( words)

A Binghamton University doctoral student aims to make innovative technology more accessible through the use of flexible hybrid electronics.

Dylan Richmond, a fourth-year doctoral student in the Materials Science and Engineering Program, conducts research focused on identifying innovative materials and processes to produce reliable, low-cost, low-waste flexible electronic devices. His research group prints and builds circuits onto adaptable plastic materials.

“My favorite part of this work is definitely printing the materials and making something go from a design to an actual circuit and then building upon that and making the whole device,” Richmond said.

He has worked with Binghamton’s Center for Advanced Microelectronics Manufacturing, or CAMM lab, for two-and-a-half years. The laboratory is directed by Mark Poliks, a SUNY distinguished professor of systems science and industrial engineering. Richmond works alongside Poliks on several projects.

“Dylan is a highly motivated individual who is always willing to accept new and challenging responsibilities,” Poliks said. “It has been my privilege to see him develop into an independent professional scientist.”

The CAMM produces devices that are made to withstand high temperatures and large influxes of energy. They can flex onto virtually any curved surface seamlessly, all while adopting the flexibility of a Band-Aid.

In traditional electronics manufacturing, copper or another conductive metal coats the entire plate and excess materials are etched away to leave behind the circuit. However, the CAMM focuses on printing through additive manufacturing. This process reduces waste and is a cost-effective alternative.

“In additive manufacturing, you only print what you need,” Richmond said. “So you print just the design of the circuit.”

While growing up in Owego, Richmond favored the complex nature of math and science over all other elementary subjects. His initial curiosity and appreciation paved the way for his future as an engineer.

During his final year at SUNY Oswego, where he received his bachelor’s degree in physics, Richmond had an opportunity to conduct research at the University of Nebraska-Lincoln on perovskite solar cells. Perovskite is a low-cost, high-energy material that can be used to power electronic devices.

Flexible hybrid electronics combine printed electronic circuits and the flexibility of plastic materials with the efficiency of thinned semiconductor devices to produce a new form of electronics.

“Flexible electronics should be able to adapt to locations and environments where they are needed. The key word here is adapting,” Richmond said. “You want them to not be a nuisance to you. You want to barely notice that they’re on you. So the challenge is making them so thin, so lightweight, so that you barely notice that you’re wearing them and they’re not getting in the way of your daily activities.”

Printed electronics remain novel and fundamental work still needs to be done. As the field of materials science gains more traction, Richmond says that he is less interested in competition and more interested in sharing his knowledge with like-minded peers in the engineering community.

“There’s a lot of people who are interested in this right now, and I just want to contribute to it,” he said.

The influence of the Green Revolution has motivated Richmond to hope for a future in the renewable energy sector. He aspires to combine his knowledge and experience in materials science with his passion for printing and green energy, to create his own renewable energy company in the future. 

“Many of our projects involve collaboration with colleagues at major corporations and other universities,” Poliks said. “Dylan has had the opportunity to develop the skills needed to work in a complex team environment. As a result he is now well prepared to work in a highly competitive research and development laboratory.”

Share




Suggested Items

The Printed Electronics Roundtable, Part 3

10/30/2022 | Andy Shaughnessy, Design007 Magazine
We recently conducted a roundtable with a team of printed electronic circuit experts from companies that run the gamut: John Lee and Kevin Miller of Insulectro, Mike Wagner of Butler Technologies, Tom Bianchi of Eastprint, and John Voultos of Sheldahl Flexible Technologies. In this third and final installment of the roundtable, these experts discuss some of the differences and similarities between PEC and traditional PCB processes, the future of printed electronic circuits, and why the best way to learn about this technology is through networking with veterans of this segment who are eager to share their expertise with the next generation.

The Importance of Rigid-Flex PCB Design Guidelines

07/21/2022 | Cody Stetzel, Cadence Design Systems
I have the tendency to try to replicate the delicacies I’ve ordered at restaurants in my own kitchen. One of my latest attempts at creating restaurant-worthy dishes was a Korean pancake that’s crispy on the outside but soft on the inside. With my amateur cooking skills, it proved to be an impossible task—I could either make only a hard pancake or one that was total fluff. While I’m still struggling to figure out the trick to bringing together the different textures of a Korean pancake, I’ve had more success in bringing together the hardboard elements and flexible PCB elements of a rigid-flex PCB. Compared to making Korean pancakes, striking the right balance of flexibility and rigidity on a rigid-flex PCB is easy if you abide by rigid-flex PCB design guidelines.

All Flex Discusses Merger and New Medical Applications

11/19/2021 | Nolan Johnson, I-Connect007
I recently spoke with Jamin Taylor, vice president of sales and marketing at All Flex Flexible Circuits in Minnesota. We discussed the company’s recent merger with Printed Circuits Inc., and some creative new flex applications, including flexible heaters and catheters for the medical field. As Jamin explains, "It’s always interesting to see different technologies amongst different companies. We’re working on a few new applications and products, like being able to do some fine lines and flex materials, but with large format, a longer format than usual. Some of their capabilities with lasering and fine features really help with our long flex capability; when we merge the two, we see a new market being created for that technology."



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.