Update An Inside Look: UK Collaborative Research Project Dissemination Conference


Reading time ( words)

The headquarters of the Surface Engineering Association in Birmingham, UK, was an appropriate venue for a one-day conference to disseminate the results of a number of UK and European collaborative research and development projects with direct relevance to the electronics manufacturing, surface engineering, and metal finishing industries. 

The conference attracted an international audience from industry and academia, taking the opportunity to share and discuss the outcome of research on a range of new materials, manufacturing, and recycling approaches with a focus on both sustainability and the cyclic economy and offering the potential for more efficient production.

dave_elliot.jpgDave Elliot, Surface Engineering Association  

Dave Elliot, Surface Engineering Association chief executive, introduced and moderated the opening session. His first speaker was Dr. Andy Cobley from Coventry University who described how, as part of the multi-partner Susonence project, sonochemical processes had been applied to the tin-lead barrel plating of battery components, resulting in significant improvements in efficiency and productivity.

andy_cobley.jpgDr. Andy Cobley, Coventry University   

Low-frequency ultrasound had been demonstrated to improve electrolyte flow within the barrel, enabling the use of higher current densities without burning. Plating capacity had been increased and better uniformity of alloy composition had been observed. The applicability of sonochemistry to the electroplating of zinc-nickel alloy for the automotive industry was being investigated.

karl_ryder.jpgKarl Ryder, University of Leicester   

Professor Karl Ryder from University of Leicester introduced a new TSB consortium project labelled Macfest--manufacturing advanced coatings for future electronic systems--which had spun out of the recently-completed Aspis project, where some interesting observations had been made when using types of ionic liquid known as deep eutectic solvents as an alternative to aqueous chemistry in the deposition of immersion gold on electroless nickel. Macfest set out to explore the fundamental molecular properties and interactions of nickel and gold in deep eutectic solvents with the objective of producing ENIG finishes with improved coating quality, solderability and wire-bondability by a process compatible with existing PCB manufacturing techniques and with the additional benefits of low environmental impact and no toxic components.

Share




Suggested Items

A Conversation with Canice Chung, TTM Technologies

12/09/2014 | Barry Matties, I-Connect007
We had the opportunity to sit down with Canice Chung, Executive Vice President of TTM Technologies, Inc. to discuss the current trends and challenges of PCB Manufacturing in China.

A Conversation with Laurent Nicolet, Schmid Group

12/07/2014 | Barry Matties, I-Connect007
During the HKPCA & IPC Show 2014, Laurent Nicolet, VP - PCB Business Unit of Schmid Group took a few minutes to discuss the automation technology that was on display and share the changes he's seen in the China market.

Thin PCBs for Smart Phones: Technology and Reliability Considerations

11/19/2014 |
The next generation of smartphones will demand very thin multilayer boards to reduce product thickness. This paper shows three different manufacturing approaches which can be used for very thin, any-layer build-ups. The technological approaches are compared on reliability level--the any-layer copper filled microvia technology which is to be considered state-of-the-art for high-end phones and the ALIVH-C/G technology well established in Japan.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.