A Conversation (and Day) with Joe Fjelstad, Part 1


Reading time ( words)

Joe Fjelstad spent a day with me recently as we toured the Evergreen Aviation & Space Museum (home of the Spruce Goose), located in the Oregon community of McMinnville. Our conversation ebbed and flowed between a wide variety of topics, from the electronics industry, to political shenanigans and the “war against failure.” In Part 1 of this multi-part series, Fjelstad introduces his “war against failure” idea, and what went terribly wrong in the advent of lead-free manufacturing. 

spruce_goose.jpgBarry Matties: Joe, you’ve mentioned to me recently that you are changing your approach to the world—that your message is different. You said, “the war is against failure.” What do you mean by that?

Joe Fjelstad: Ah yes, the war on failure. It is a recent epiphany of mine that failure is the true enemy of electronics. It is the disease, not the symptom, which must be attacked. To date, the industry has largely focused attention on trying to make something reliable using materials and processes that are intrinsically weak. It is a Sisyphean task that will never end. It's like the arcade game Whack-a-Mole. You bang down one problem and a new problem pops up in its place somewhere else.

Much of the challenge and most of the problems are related to solder, which has gotten worse with the introduction of lead-free, a movement that I and others rallied against for several years without success, having seen that the science did not support the claims of the proponents. On the bright side, that failure was what led to the inspiration for manufacturing electronics without solder. That said, I continue to pursue that goal. However, truth be told, I would be perfectly satisfied, and I've said this on more than one occasion publicly, if the only thing that came out of my effort was that the EU reversed the ban on lead in tin-lead solder. A lot of lead has been used in electronics over the last several decades and nobody was ever harmed by it. Well I take that back. An uncounted number of people in Asia and South Asia have been harmed by leaded solder in reclamation activities there. However, that failure and onus rests at the feet of unscrupulous businesspeople in the West, who were shipping electronic waste to those areas without giving people education and training as to what the hell they were doing and what the risks were. It was a case of capitalism gone awry and innocents victimized in the process. Elimination of lead from paint and gasoline were excellent decisions relative to human health; the elimination of lead from solder, except in the case just mentioned, was, at the end of the day, an expensive and wasteful exercise with ongoing expensive ramifications.

Broken_Solder_joint.jpgMatties: I was listening this morning on the news about the lead-free exemption for the military and they were talking about how that may even disappear. What do you think of that as a possibility?

Fjelstad: I would say that fundamentally it has already disappeared.

Matties: Is that because components just aren't available?

Fjelstad: Yes, and that's the great irony. I made a point of that in my recent talk at the IEEE Aerospace conference in Big Sky, Montana. Here's the scenario: Presently the military is exempt and can use tin lead solder. However, the military transitioned to commercial-off-the-shelf (COTS) parts because it was going to be cheaper to make their electronics. It makes a good deal of sense. In fact, when I worked on the Land Warrior project with Pacific Consultants, we built the entire soldier-of-the-future system out of COTS. Colonel Jette, the Pentagon’s project manager overseeing this whole development made very clear his desire to use COTS. At the time, Pacific Consultants, which consisted of 35 to 40 scientists and engineers, went up against General Dynamics, Raytheon, and Motorola for the contract, and we beat them. The reason we beat them is because we actually made what the Pentagon asked for in its procurement spec. When it came to delivery, the product had the right look and feel as well as performance. In contrast, some of the competitive solutions delivered were quite bizarre. The military industrial complex got that name for a reason. It's because the military is so interwoven with the aerospace and weapons industries.

Anyway, we beat them and built the system completely out of commercial, off-the-shelf hardware. That makes sense to try and control your budgets and we built it with success and within budget, but did not win the production contract. That was given to one of the big boys. Now fast forward to what you have today with lead-free. Who drives the electronics industry? It’s not the military. They had their turn—back in the '60s and '70s; now they're just the caboose at the end of the train.

Share




Suggested Items

Real Time with… IPC APEX EXPO 2023: Jesse Session Talks R&D at Taiyo

01/11/2023 | Nolan Johnson, I-Connect007
Nolan Johnson checks in with Taiyo America’s Technical Manager, Jesse Session, about the new and exciting developments cooking in Taiyo’s R&D department. The company’s groundbreaking inkjet solder mask product line is expanding to meet the needs of customers looking for updated color options that retain the same quality standards and reliability that have come to define Taiyo’s offerings.

Preventing De-wetting Defects In Immersion Tin Soldering

01/04/2023 | Britta Schafsteller, Atotech
Immersion tin is well accepted as a high-reliability final finish in the industry. Due to its excellent corrosion resistance, it exhibits major market shares, particularly in the automotive industry. During the soldering process, an intermetallic compound (IMC) is formed between copper and tin. One remaining concern in the industry is the potential impact of the IMC on the solderability of the final finish. In this article, typical failure modes in soldering immersion tin are described and correlated to potential root causes for the defects.

Taiyo: Reopening Europe for Solder Mask

12/19/2022 | Nolan Johnson, I-Connect007
Nolan Johnson and Stuart Down discuss Taiyo’s partnership with Ventec and how both companies are leveraging their expertise to blaze a trail into the European PCB market. Stuart shares his outlook on the market and the unique challenges posed by global political instability and supply chain constraints, as well as how Europe’s evolving chemical regulations have impacted solder mask formulation. With their sights set on ramping up manufacturing capabilities, Taiyo sees a secure path forward to establishing a sizeable market presence in this promising region.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.