Reading time ( words)
Product Specialists Michael Bode and Geoffrey Hazlett join Guest Editor Dan Feinberg to talk about the company and its products and solutions. They also talked about some of the technologies being enabled by the company, including controlled impedance and insertion loss testing.
Share
Suggested Items
Reduce Board Skyline With Solid Cavity Design
07/20/2023 |
Kris Moyer, IPC
With the increasing shrinkage of modern electronics in both board size and product volume, it’s becoming more difficult to mount components to the PCB surface and still meet volumetric requirements. To avoid chip-on-board (COB) processing, board cavities can help mitigate the Z-axis skyline volumetric issues and allow for components that would otherwise not fit within the skyline to be used.
The Survey Said: Designing Around Missing Data
06/09/2022 |
Andy Shaughnessy, Design007 Magazine
One of the best tools we have for keeping our fingers on the pulse of the industry is the reader survey. When we want to find out what’s going on, we just ask. Fortunately, our readers are not a shy bunch of folks. They don’t mind sharing—the good, the bad, and the ugly. In a recent survey, we asked our PCB designer readers, “What missing information or data (impedance requirements, library data, etc.) do you find yourself having to ‘design around’?”
A Textbook Look: Signal Integrity and Impedance
05/18/2022 |
Pete Starkey, I-Connect007
Believing that I knew a bit about signal integrity and controlled impedance, I was pleased to take the opportunity to connect with an educational webinar that I hoped would extend my knowledge. In the event I was surprised at how little I actually knew, and the webinar was an excellent learning opportunity. The webinar was introduced and expertly moderated by Anna Brockman of Phoenix Contact in Germany.
