PCB Prototyping Evolves With New Wave of Electronics Printers


Reading time ( words)

A new wave of printers targeting PCBs is enabling rapid, local prototyping while protecting company IP, finds IDTechEx Research.

The established $80 billion PCB market is under increasing strain to produce more customized circuit boards more quickly, driven by the proliferation of choices of consumer electronics devices, many only being sold for short periods of time until being bettered.

The current status quo of making prototypes in Asia and then shipping them to the product developer not only typically takes one to three weeks but can put intellectual property at risk, at a time when product developers seek both time-to-market and product design as key differentiators in a sector where branded devices are sometimes copied and commoditized before they have even been launched.

IDTechEx Research has discovered that this has led to a new category of printers that print conductive ink and other materials to enable in-house, low cost, rapid prototyping and development work.

According to research conducted for the report “From 2D to 3D Printed Electronics 2015-2025” (www.idtechex.com/3dpe) the opportunity is being explored mainly by start-up companies rather than large equipment providers. Of those involved, 45% are targeting the low cost printer opportunity (under $3,500 per printer) focusing towards the educational and hobbyist markets.

The rest are focussing on the industrial market, targeting up to 6 circuit layers, which accounts for 43% of all PCBs produced.

IDTechEx Research finds that both groups have to contend with the higher resistivity of the ink, although the increasing supply of nanoparticle inks will help to close the performance gap with etched traces.

This will culminate in at least $130m of specialist equipment sales in 2020 and thereafter scale rapidly as not only more materials become available but also ability to print on everything from flexible substrates to 3D surfaces unleashes current design constraints. The new wave of printed electronics manufacturing will enable new product designs.

For more information see the new report from IDTechEx “From 2D to 3D Printed Electronics 2015-2025”. The IDTechEx Show! on November 18-19 in Santa Clara covering Printed Electronics and 3D printing will showcase the solutions.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

12/02/2022 | Nolan Johnson, I-Connect007
Normally, the holiday season is a slow(ish) news time, but this year just feels different. My opinion is that the technology industry banked up a whole bunch of innovations and new products during the pandemic disruptions, which are coming to market as quickly as possible. The November/December news is full of technology discussion, as my selections this week clearly demonstrate.

3D Electronic Devices With Additive Manufacturing

11/29/2022 | Shavi Spinzi, Nano Dimension
Imagine fabricating PCBs without the hassle of drilled vias and metal plating. Imagine PCBs with near-perfect registration. If we take it to the next stage, imagine drawing electronics in 3D space. There is a way to do all this with additively manufactured electronics (AME). We just need to start to think in 3D. This will allow us to abandon the 2D limitations that we have become so used to and expand our horizons so that we can climb to higher levels of performance. In this article, I will explore the two fundamental capabilities that are the cornerstones for drawing electronics in 3D space, which is where AME technology and 3D design capabilities converge.

Electronica 2022: Happy to Be Back in Munich

11/21/2022 | Pete Starkey, I-Connect007
As we stepped out of the hotel into the drizzling rain, we were relieved that it wasn’t snow. Looking down the escalator into the U2 platform in Munich’s Hauptbahnhof central station early on the morning of Tuesday, Nov. 15 and observing the mass of humanity pushing and shoving to cram into trains to the exhibition centre, it appeared that a significant proportion of the international electronics industry had gathered to attend electronica 2022, co-located with SEMICON Europa and recognised as the world’s leading trade fair and conference for electronics.



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.